Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /usr/local/www/nat.guyton.net/geeklog-1.4.0sr2/public_html/lib-common.php on line 4396
Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /usr/local/www/nat.guyton.net/geeklog-1.4.0sr2/public_html/lib-common.php on line 4396
Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /usr/local/www/nat.guyton.net/geeklog-1.4.0sr2/public_html/lib-common.php on line 5531
Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /usr/local/www/nat.guyton.net/geeklog-1.4.0sr2/system/lib-comment.php on line 321
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CDT/-5.0/DST' instead in /usr/local/www/nat.guyton.net/geeklog-1.4.0sr2/public_html/lib-common.php on line 1143 Nat's Geeklog - Wireless Network Upgrade
I recently bought the Linksys pre-N router (WRT300N) and a laptop PC card. I hate to say it, but the 4x range that it promises is flat out wrong. I get better connection to my wireless G router (WRT54G) up on the second floor. However, the throughput is amazing - 270 mbit/sec as opposed to 54. I just need to get it working well.
I see that they have come out with some firmware upgrades since I last checked a week ago, and it mentions improving wireless power and performance. We'll see what happens!
The following comments are owned by whomever posted them. This site is not responsible for what they say.
Wireless Network Upgrade
Authored by: nat on
Wednesday, June 07 2006 @ 07:49 PM CDT
Hurrah! It's working a LOT better now - better range, and also working with my other network infrastructure. Nice. I was worried I might need to return it, but upgrading to firmware version 0.93.3 did the trick.
I recently bought the Linksys pre-N router (